• Review of the 70-year history of the Emile Egger centrifugal pump factory

    From potato flake to high-temperature pump January 1944: Emile Egger, a process engineer, plans and builds the production facility...

  • Egger Cantilever Pumps for sewage and chemical applications

    After priming, Egger cantilever pumps are able to pump up to the bottom of a tank or reservoir without...

  • Closed coupled Egger pumps for sewage plant in Genova, Italy

    Recently, our Italian Egger Factory Turo® Italia supplied 48 different centrifugal pumps. The pumps are all in a closed...

  • Industry Seminar in Cressier, Switzerland, Sept. 8th 2017

    As part of the 70th anniversary celebration, we oranize an Industry Seminar in Neuchâtel, Switzerland. The focus of this...

  • Waste Water Seminar in Cressier (CH), Sept. 8th 2017

    It all started 70 years ago in the autumn of 1947, when Mr. Emile Egger decided to establish his...

  • Egger Reactor Pump type EO 9-250 HPT4 LB5S Ex

    Reactor Pump for the American market

    Currently, a reactor loop pump of EO HPT series is at the final assembly department of the pump factory...

  • Egger Pumps for the Offshore Industry

    Egger has taken part in many offshore projects, one of them is the Goliat FPSO. Goliat is the first...

  • Justierung des Propellerkopfs einer Rohrbogenpropeller-Pumpe RPGA 701 LB6.1 im Egger-Stammwerk Cressier, CH

    Axial pumps for Munich sewage treatment plant

    Large recirculation pumps for WWTP Gut Grosslappen, Munich (Germany) Egger Elbow propeller pump RPGA on test bed at factory...

  • Egger submersible pump with internal cooling or oil lubrication

    New Motor Generation for Egger Submersible Turo® Pumps

    New Motor Design for Egger wet-pit Pumps The Egger submersible Pump series Turo® U/UM have been completely relaunched. The new...

  • Egger realizes pump technology for LINEG

    The Lineg Wastewater Association operates a big pumping station with 3 vertical dry mounted Egger process pumps from type...

  • Successful performance test of the new Egger Elbow Propeller Pump generation

    At the official test facility of the Centre Technique des Industries Mécaniques in Nantes (CETIM), two new Egger axial...

  • High workshop load at the Egger factory in Cressier, Switzerland

    Our workshop in Cressier (Switzerland) is very full by the end of the year and for the beginning of...

  • Egger Turo® pumps in a tight space in Lingen DE

    The existing main pumping station of Lingen in Niedersachsen has been renovated and adapted to the increased demands on...

  • Odorless due to the Egger Vortex pumps

    Two of the four delivered pumps are installed in the pumping stations currently under construction. These are two major...

  • 11 Elbow Propeller pumps for KCL in Laos

    Egger provides a total of 11 Elbow propeller pumps to Vinachem in Vietnam. It’s a liquid brine process in...

  • Precise and energy saving aeration air flow control with Iris® valves

    This is a demonstration display for Egger Iris® Diaphragm Control Valves. You can see the stable and precise air...

  • TA 61-100 HF6/7,5 LB3

    8 Egger Vortex pumps and 2 Diaphragm Control valves for the stormwater tank in Homberg-Hakenfeld

    The 8 Egger Vortex pumps TA will pump sludge and fibrous waste water out of the stormwater tank for...

  • Flow measurements with Iris® Diaphragm Control Valves in the test facility for hydraulic engineering and water management in Obernach (GER)

    The Technical University of Munich (TUM) – Faculty of Civil Engineering and Surveying – operates a test center for...

  • Raw wastewater pumping station for Münster City

    Raw wastewater pumping station (separate system) Münster- Wolbeck/ Loddenbach The wastewater is tainted with many fibrous materials because of...

  • Thanks for your visit on the Egger booth at Weftec in New Orleans

    The Weftec show in New Orleans, Louisiana is opening for public from 24th to 28th of September 2016. We would...

  • Welcome on Egger booth at Khimia in Moscow

    The Khimia show in Moscow is opening for public from 19th to 22nd of September 2016. Our sales team is...

  • UNOX Pure Oxygen System Upgrade with Iris Flow control valves for New Orleans Sewer and Water Board

    Egger replaces 8 inch butterfly valve with a 4 inch Iris® Air Flow Control Valve helping New Orleans Sewerage...

  • Thank you for your visit at the Egger booth during Turbomachinery and Pump Symposium

    We would be glad to advice you on our Egger booth during Turbomachinery and Pump Symposium in Houston, booth 1232....

  • K + S Kali GmbH invests 400 Million Euro in water protection

    In past decades, K+S Kali GmbH has undertaken much to improve the environmental situation on the Werra and Weser...

  • Trade Shows in September 2016

    During September, Egger is present at the following trade shows: Pump Symposium, Houston (USA) 12.-15.09 Khimia, Moscow (RUS) 19.-22.09 Weftec, Louisiana...

  • Implementation of Microsoft Dynamics AX at Emile Egger & Cie SA

  • Increasing the availability of intake pump stations – Case study

    The Saarland Waste Disposal Association significantly increased its plant intake pump station availability by exchanging existing impeller channel pumps...

  • Energy saving with Iris® Diaphragm Control Valves on WWTP Chemnitz

    As part of an energy optimization at the WWTP Chemnitz, a total of 30 control valves were replaced by...

  • Diplomed Apprentices 2016 Egger Cressier

    Egger apprentices received their diploma

    We have the pleasure to  announce the successful apprenticeship diploma of our following apprentices (from left to right): Sefa Ürer, multi-skilled...

  • Thanks for your visit on the Egger booth – Anniversary IFAT sets new benchmark

    50 years of IFAT— a success story that started out in 1966 with 147 exhibitors and 10,200 visitors and...

  • Egger Pumps for Volvo Cars

    In close cooperation with the company Dürr, the Swedish carmaker Volvo optimized the pretreatment of car bodies in its...

  • Egger pumps in Gateway Gardens

    Near to the international airport of Frankfurt, a new city is being developed with many office space, hotels, conference...

  • Turo Subersible

    Turo® TA for raw waste water

    Pumping blockage of raw wastewater has been increasing in the last years. After a complex research work, we were...

  • Egger Recirculation Sludge pumps

    16 recirculation pumps and 9 return sludge pumps for WWTP in Berlin

    As part of a renovation program, the waterworks of Berlin (BWB) replace the tank lines 6-8 at the wastewater...

  • Egger Pumps in rolling mill

    In the rolling mill of the “Badische Stahlwerke” in Kehl, Germany, a total of 19 process-pumps have been successfully...

  • Wastewater grit removal with Egger pumps

    In the mechanical pre-treatment of wastewater treatment plants, the grit removal pumps used on washers and classifiers are exposed...

  • Egger Iris Valve

    Aeration air flow control on WWTP Jena

    At the sewage treatment plant of Jena in Germany four decentralized closing square-diaphragm control valves were replaced by Iris®...

  • Egger Pumpen PW Prien-Stock, Deutschland

    New Pumping station in Bavaria with 4 Egger Turo® Pumps

    Inauguration of the Chiemsee Sewage and Water Board Prien Stock-North pump station The Chiemsee Sewage and Water Board, in...

  • Egger Turo Pumpen Eurodyn Schweinfurt

    Turo® Vortex Pumps for pumping station in Germany

    Due to a renovation of the “Hahnenhügel Bridge”, the existing pipe to the pumping station PW 100 in Schweinfurt...

  • Egger Turo Pump on trade show

    Egger at IFAT in Munich

    IFAT, the world leading trade fair for water, sewage, waste and raw materials management open its doors from 30th...

  • Order in the salt industry

    We are pleased with our order for eight elbow propeller pumps in the salt industry. We will produce two...

  • Egger Shanghai Team

    New Egger subsidiary in China

    After many years of success in China through several sales channels, Emile Egger & Cie SA has decided to...